Description
FORCE 125 230V ACD CARDBOARD BOX
• MMA inverter electrode welder in direct current (DC). Flexible use with a wide variety of electrode types: rutile, basic, stainless steel, cast iron, etc. Features: - Compact and lightweight - High welding current stability despite variations in supply voltage - Arc force devices: the light arc is stabilized to adjust it based on the material and the desired weld thickness. Hot start: As soon as the electrode comes into contact with the metal surface to be welded, a pulse activates pre-heating of the electrode within a few thousandths of a second. Anti-stick: prevents the electrodes from overheating and sticking when the welding current is turned off. - Thermostatic, overvoltage, undervoltage, overcurrent, and motor generator protections (+/- 15%). - Compatible with generators. Complete with MMA welding accessories and cardboard case.
Technical data
• Single-phase mains voltage: 230 V
• Mains frequency: 50 / 60 Hz
• Current range: 10 - 80 A
• Use (use at 20°C): 50% 80 A
• Max. DC current: (EN 60974-1) 80 5% A
• Open-circuit voltage: max 72 v
• Maximum absorbed current: 15 a
• Maximum absorbed power: 2.3
• Minimum generator power: 3 kw
• Mains fuse: 10 a
• Efficiency: 82 %
• Power factor (cosphi): 0.6
• Electrodes usable in DC: 1.6 - 2.5 mm
• Degree of protection: IP21
• Dimensions: 32 x 37 x 14.5 cm
• Weight: 3.10 kg
In Equipment
• 16 mmq cable 1.8 m
• Hammer/brush
• In cardboard box
• Dallas 300 electrode holder 300A
