Description
Pramac PY000A000BG Automatic ATS Panel for 10,35 kVA generators
The PY000A000BG automatic ATS panel for generators allows you to connect the generator to the home network so that it can start automatically in the event of a power failure. The ATS panel is compatible with the Pramac WX3200 ES and WX 6200 ES generators.
Features
• If the primary power source stops supplying power, the Pramac ATS automatically starts the generator. After approximately 1 minute, the ATS supplies power to the generator's electrical load. If the primary power source is restored, after approximately 1 minute, the ATS stops the generator.
• The emergency stop button allows you to immediately stop the generator and interrupt the battery charging function.
• The mains power, generator, load, battery and fault indicator lights are present. With ATS multipin connector and signal cable.
Technical data
• Operating Voltage: 8 - 15 V DC.
• Single-Phase Contactor Rated Current: 45 A.
• Single-Phase Contactor Rated Voltage: 230 V.
• Rated Frequency: 50 Hz.
• Rated Power: 10.35 kVA.
• Charger Output Voltage: 13.8 V DC.
• Charging Current: 1 A.
• Time Interval Operating: -20°C ÷ 70 °C.
• Ingress Protection: IP 20.
• Cable: 5 m.
Supplied
• ATS panel.
• 5-meter cable for ATS.
• Instructions.
Control panel accessories
• ATS - Automatic Transfer Switchboard: Thanks to the The WX generator automatically intervenes in the event of a power failure, continuing to support all the loads in the home. Thanks to the connector, the generator can be easily disconnected if it needs to be moved for other activities.
• Features:
- Control panel.
- Contactors with interlock.
- Selector: AUTO / MANUAL. In "manual" mode, the panel does not control the generator, which can be disconnected or turned on without interfering with the panel or the loads to which it is connected.
- Emergency button.
- Battery charger.
- Cable with 5-meter long connector.
• Status indicators
- Utility Power LED: Mains power present.
- Generator LED: The generator is running.
- Load LED: The load is powered (from the mains or generator).
- Battery LED: Battery charged.
- Failure LED: Fault, the generator has not started.
Panel dimensions
• Length: 410 mm.
• Width: 310 mm.
• Height: 180 mm.
• Weight: 7 Kg.
