Description
Makita DHP482 18V Impact Drill Driver with 72-Accessory Case
Description: 18V impact drill driver with four-pole motor and ergonomic handle, ideal for installers, builders, and maintenance personnel. Equipped with an integrated LED light to illuminate the work area. The variable speed switch with two settings (0–600 / 0–1,900 rpm) ensures excellent start-up control. Electric brake to stop the motor immediately if necessary. The XPT system allows use in dusty and dripping water conditions. Supplied without batteries and charger; Includes Makpac case with 72 accessories.
Accessories included (74 pieces):
- 48 hex bits;
- 8 50 mm and 40 25 mm bits;
- 4 1/4 × 75 mm hex sockets (Ø 8–10–12–13);
- 18 cylindrical shank bits:
– for wood Ø 4–5–6–8–10 mm;
– for masonry Ø 4–5–6–8–10 mm;
– for metal Ø 3–3.5–4–4.5–5.5–6–6.5 mm;
- 1 countersink;
- 1 75 mm magnetic bit holder;
- 1 Ø 16 mm bit;
- 1 Ø 20 mm bit.
Technical data:
| Platform |
LXT |
| Protection |
Battery |
| No-load speed |
0–600 / 1,900 min-1
|
| Max. tightening torque rigid joint / rigid joint elastic |
62 / 36 Nm |
| Clutch adjustment |
21 |
| Impulses per minute |
0–9,000 / 28,500 min-1
|
| Max. hole diameter in wood |
38 mm |
| Max. hole diameter in masonry |
13 mm |
| Max. hole diameter in concrete |
13 mm |
| Max. hole diameter in Steel |
13 mm |
| Guide Mount |
1/2″-20 UNF |
| Chuck Capacity |
1.5–13 mm |
| Sound Power Level |
93 dB(A) |
| Sound Pressure Level |
82 dB(A) |
| Noise Uncertainty (K-Factor) |
3 dB(A) |
| Vibration Level (3-Axis) – Drilling |
≤ 2.5 m/s² |
| Weight with battery (EPTA) |
1.5–1.8 kg |
Features:
- Tool speed increases as you increase the pressure on the trigger switch;
- Dual LED headlamp for precise operation even in dimly lit areas; activates automatically when the trigger is pressed;
- Three modes and 21 steps for selecting the torque by rotating the dial;
- Speed adjustment lever to adjust torque and speed as needed;
- Metal belt clip to keep the tool always close at hand.
