Description
Husqvarna 555RXT professional brushcutter 53.3 cm³ 2.8 kW X-Torq engine
Husqvarna 555RXT is a very powerful professional brushcutter developed for full-time work in extreme conditions. The X-Torq® engine delivers raw power, rapid acceleration and significantly reduced fuel consumption and harmful emissions. The long drive shaft and 35-degree angled gear head make it easy to make wide passes. Vibrations are reduced to a minimum thanks to the LowVib® system. Supplied with Balance XT harness.
Included
• Husqvarna 555RXT brush cutter.
• Grass blade: Multi 350-3.
• Harness: Balance XT2.
• Trimmer head: T55X M12.
Technical Data
Engine
• Displacement: 53.3 cm³.
• Power output: 2.8 kW.
• Fuel tank volume: 1.1 l.
• Fuel consumption: 480 g/kWh.
• Speed at maximum power: 9000 rpm.
• Idle speed: 2800 rpm.
• Maximum output speed, crankshaft: 10500 rpm.
• Electrode gap: 0.5 mm.
• Clutch engagement speed: 4100 rpm.
• Torque, max: 3.5 Nm.
• Torque, max at rpm: 6900 rpm.
• Spark plug: NGK BPMR7A.
Equipment
• Grass blade: Multi 350-3.
• Harness: Balance XT2.
• Trimmer head: T55X M12.
• Handle type: Handlebar.
Capacity
• Connectivity: Not applicable.
Control
• Cutting width: 54 cm.
Transmission
• Bevel gear ratio: 1.47.
• Drive gear angle: 35°.
Emissions
• Exhaust emissions (CO2 EU V): 1000 g/kWh.
• Exhaust gas emissions (average HC): 52.86 g/kWh.
• Exhaust gas emissions (average CO): 239.74 g/kWh.
• Exhaust gas emissions (average CO): 278.42 g/kWh.
• Exhaust gas emissions (average NOx): 1.72 g/kWh.
• Exhaust gas emissions (average NOx): 1.69 g/kWh.
Vibrations
• Equivalent vibration level (ahv, eq) left / right handle: 1.5/1.6 m/s².
Lubricant
• Lubricant type: Husqvarna 2-stroke or equivalent at 50:1.
• Lubricant type (bevel gear): Mineral grease.
Sound and noise
• Sound power level, guaranteed (LWA): 121 dB(A).
• Sound pressure level at operator's ear: 101 dB(A).
Dimensions
• Tube diameter: 35 mm.
• Weight (excl. cutting attachment): 9.2 kg.
• Tube length: 1,483 mm.
Features
• Powerful and efficient X-Torq engine: The X-Torq® engine stands for efficient combustion, without compromising on torque or power. At each cycle, the cylinder is cleaned with fresh air before the mixture enters, to prevent unburned fuel from mixing with the exhaust gases. The result? Reduce emissions by up to 75% and increase efficiency while working.
• Long shaft: The long shaft provides an extended reach, making it easier to clear grass.
• Tap 'N Go™ head: Heavy-duty double-line cutting system with Tap'n Go. Line feeding is quick and easy by simply tapping the head on the ground.
• High, off-centre handle: The high, off-centre position increases freedom of movement when working on slopes.
• Primer: Primer designed for easy starting.
• Optimised shaft and gears: The optimised shaft length and the 35° inclined bevel gear make operation easier and allow you to work with the cutting unit parallel to the ground.
• Smart Start: Engine and starter specially designed for Quick and easy starting with minimal effort. Resistance in the starter cord is reduced by up to 40%.
• Auto-return stop switch: When the stop switch is used, it is automatically reset to ON for easier starting.
• Ergonomic design: The angled bar and comfort handles provide an excellent grip and a comfortable working position.
• Easy cutting attachment replacement: The magnetic locking pin makes it easy to replace the cutting attachment.
• LowVib: Effective anti-vibration elements absorb vibrations, protecting the user's arms and hands.
• Optimal cutting performance: Bevel gear designed for optimal cutting performance. It provides high torque and ensures the correct angle so that the cutting equipment is kept parallel to the ground.
• Adjustable eyelet for attachment of harness: Adjustable eyelet for best balance.
